The quality demands of modern block-moulds for the manufacture of white or black EPS rigid foam blocks is very high.
Uniform density distribution (including a high percentage of recycled material), good uniform fusion, low residual moisture content, minimal energy consumption and short cycles are the basis of efficient block-production.
These high efficiency requirements are standard for all AKKAYA - block-moulds
Even with raw materials not corresponding to the Western European quality standards are used,
a high standard of production can be achieved and maintained.

BLOCK- MOULDS ABM-VV:

The ABM-VV block- mould series is an economically priced, efficient system with fixed mould dimensions. The robust design ensures continuous trouble-free operation. The inner walls of the block- mould are made of stainless steel wedge-wirer and ensure due an extended maintenance rate a high operational availability even when processing materials with higher dust-content.
The secure block ejection onto the discharging conveyor with integrated block-scale is ensured due one slightly tapered side of the mould.
All block- moulds are equipped with a power saving Vacuum-system with a very large storage tank.
Due to the use of the latest technology the Vacuum-system runs without water-pumps!
For process control the Siemens SIMATIC S7 CPU is used.
The IP65 protection class design of the SIMATIC touch-screen panel ensures long life and simplified operation even when in harsh operating conditions.

ALL ADVANTAGES AT A GLANCE:

• Good cost/performance ratio
• Discharging conveyor with integrated block-scale
• Vertical design > required less floor-space
• Robust design > trouble-free continuous operation
• Low cost door-seal with lasting durability > convenient maintenance
• Mould made up of stainless-steel wedge wirer > prolonged maintenance intervals
• Bearings and hinges easy to maintain > short maintenance time
• Process-control via Siemens SIMATIC S7 CPU > obtainable worldwide
• Various electronically controlled steaming variants > optimum cycle-times
• Touch screen panel with IP65 protection class design > long durability
• Easy operation systems
• Vacuum-system without water pumps > energy savings
• Outer wall insulation of block mould body > steam savings

OPTIONS:

• Printer to mark product data on the block
• Handling device for blocks
• Water recirculation cooling plant with heat-exchanger for Vacuum-system
• Fully automatic block storage systems for white and black blocks